Installation and installation of plastic windows Automatic translate

Today, plastic windows are widely used for glazing residential, commercial and public buildings. Their popularity can be explained by aesthetics, good energy-saving characteristics, long service life and relatively low price.

There are many types of PVC windows that differ in structural details, color, design and shape. Among the products of the company “Plastic Windows” you will surely find what you need. A lot of useful information on the production of plastic windows is on the site. www.plastika-okon.ru However, one should not forget about the importance of the correct installation and installation of plastic windows.

Installation is a very important stage of the technological process. An improperly installed window will not be able to provide good heat and noise insulation, it will allow air and moisture to pass through. This will lead to constant drafts, condensation on the glass and the spread of mold. The installation procedure is regulated by GOST, the requirements of which must be strictly observed.

Steps for proper installation

1. Protection of the building from construction waste. It is necessary to cover furniture and valuables with a special cloth or plastic film to protect against dust and dirt.
2. Preparing new windows for installation. Double-glazed windows are removed from the frames, the sashes are removed, holes for fastenings are prepared.
3. Dismantling of old structures. The craftsmen dismantle the ebb and the windowsill, the opening window structures are removed from the hinges, and the old frame is sawn and removed from the opening. Then they clear the opening of construction debris and old insulation, remove accumulated dirt.
4. Installation of new designs. First, a frame is installed in the opening, aligning it with vertical and horizontal levels. After this, the ebb is fixed, double-glazed windows are inserted and the sashes are hung. Check how the sash works and, if necessary, adjust the fittings. The fittings should work smoothly, and all the hooks should function properly. The cavity of the mounting seam is filled with polyurethane foam around the entire perimeter of the opening, after which the window sill is installed and foam is applied to the joint of the window sill and frame. A protective film is removed from the inside of the window to ensure that there are no cracks in the profile under the film.

Correctly installed windows in the future do not require any maintenance and maintenance efforts. If you take into account all the nuances during installation, new windows will perfectly serve for many years.