Frequent malfunctions of Electrolux electric stoves 
Automatic translate
Today, specialists from service centers involved in the maintenance of electric stoves have identified three main types of critical malfunctions of Electrolux stoves: the stove does not turn on, the burners do not work, the oven does not function.
Professional repair of an Electrolux stove is a complex matter, so it can only be trusted by competent experts who have experience in setting up and restoring the functionality of equipment produced by the famous Swedish company.
The stove does not turn on
As a rule, the cause of this malfunction lies in the unexpected failure of individual parts of the electric stove as a result of natural wear and tear. There are times when the oven works, but the backlight does not. If this happens, then you need to carefully examine the signal lamp - for this purpose it is better to contact a specialist who can easily replace the part if it is completely broken.
In general, the following can be added to the list of reasons why the stove does not turn on:
- the heating element is broken;
- the burners are worn out;
- the control panel is faulty;
- The fuses or thermostat have blown.
Typically, the above parts are not repaired, but replaced with new ones - this can be done at a service center.
Burner malfunctions
Most often, burners fail for the following reasons:
- Incorrect handling of the oven. Many people use unsuitable cookware for Electrolux electric stoves, such as a saucepan with an excessively concave or curved bottom. It is also not uncommon for dishes to be placed on the burner until the desired cooking mode has been selected.
- No tension. Here you need to check that the machines are working and in an active state.
- Spiral breakage. Too frequent overheating of this element leads to the spiral burning out.
- The limiter is broken. If the thermostat breaks, the burners will not work correctly - the lack of temperature control will not allow you to effectively regulate the power of the stove.
In some cases, the problem of burner failure may be hidden in the control panel - this unit of Electrolux electric stoves also often malfunctions.
Oven doesn’t work
Oven malfunctions manifest themselves as follows:
- Failure of the heating element. Malfunctions that occur in the operation of the heater are most often caused by a high load on the stove or its too frequent operation. Also, the heating element may break due to voltage surges in the electrical network or as a result of natural wear and tear of parts.
- Thermostat failure. The reasons for the breakdown of the thermostat in the oven are similar to the reasons for the breakdown of the thermostat that controls the operation of the burners.
- Control system malfunction. It is almost impossible to predict when failures in electronic systems will occur. The control panel may break either partially or completely, and you can only find out what led to this in a specialized service center. A small nuance - to restore full functionality of the control system, it is necessary to use only original spare parts for repairs.
A separate category of breakdowns should include a malfunction of the liquid crystal display, which is designed to display all operating modes and parameters of the Electrolux electric stove. As a rule, the connecting cable breaks, but it is impossible to say that this is actually the case right away - only the service center will tell you the exact information about the cause of the malfunction.