Materials used in the manufacture of workwear Automatic translate

No one has yet been able to come up with a material that is more environmentally friendly and has an incomparable level of comfort for humans than simple cotton. It was this fabric, sometimes with special impregnations, that was used for a long time in sewing workwear.

But cotton fabrics also have significant disadvantages. For example, they do not withstand the test of strength when in contact with sharp objects and quickly wrinkle. And water-repellent impregnation significantly reduces breathability.

With the advent of mixed fabrics consisting of approximately 60% polyamide fibers and 35-40% cotton, the situation has changed. The fabric received enhanced strength and other protective characteristics, but did not lose air permeability. The percentage composition of fibers can change, even up to 100% polyamide, but the level of comfort remains the same.

Any items for sets of protective work clothing are now made from such materials. One of the big advantages of this overalls is the visual appeal of modern models. You can see what samples from the most popular collections look like in this catalog https://www.krasnodar.spets.ru/ .

It’s not for nothing that these sets are often used not for their intended purpose, but as clothing for leisure.

What should be the material for workwear?

In any production, even if it is a seemingly calm and harmless job, the work of a laboratory assistant, the overalls are tested for strength. For abrasion from constant contact with a hard surface, for punctures and cuts from contact with sharp objects, for the ability to clean from dirt, etc.

The first characteristic that determines the strength properties is the density of the material. According to standards, it should be at least 130 g/m² for the lightest fabrics. But even the densest fabrics, 350 g/m², allow at least 20 cubic decimeters of air per 1 square meter to pass through.

In winter workwear sets, the well-retaining but very heavy batting has long been replaced by lightweight synthetic insulation with the same excellent heat-saving characteristics. For example, 2-3 layers of padding polyester or similar materials made of synthetic fibers. Despite the minimal thickness, such insulating pads have a density of 300-400 g/m².

In the manufacture of workwear, special requirements are placed on the fittings used and the quality of the seams. Zippers with windproof flaps, buttons, drawstrings, laces, all these details increase the level of protective properties of clothing.