Car breakdowns that you can fix yourself Automatic translate

A modern car is a very complex mechanism consisting of many interconnected systems - not everyone can understand this heap of technologies. Most car owners contact the service when any malfunctions occur, but there are a significant number of breakdowns that can be successfully eliminated independently. Knowing the basic principles of diagnostics and repair will help save money and time, and also teach you to understand a little more about how a car works.

Regular checks of the technical condition of the machine are the key to safe operation. Simple diagnostics usually consist of a visual inspection of the main units and control of the level of technical fluids. In this case, special attention should be paid to the condition of the battery, tire pressure and operation of lighting devices.

Computer diagnostics on your own

Modern cars are equipped with electronic control systems, which allows diagnostics to be carried out using special scanners. For independent testing, it is enough to purchase a simple OBD scanner and connect it to the diagnostic connector of the car. Such devices allow you to read error codes and determine malfunctions in the engine and other systems.

The diagnostic process begins with connecting the scanner to the OBD-II connector, which is usually located under the steering column or under the glove compartment on the passenger side. Reading error codes and decoding them is done using special reference books or mobile applications. This approach helps to identify problems at an early stage and prevent serious breakdowns.

Replacement of consumables and filters

Engine air filter

Replacing the air filter is one of the simplest maintenance procedures. A dirty filter reduces engine power and increases fuel consumption. The replacement frequency is usually 10-15 thousand kilometers, but in dusty conditions this interval should be reduced.

The replacement procedure does not require special tools and takes literally a few minutes. You need to find the air filter housing under the hood, unscrew the cover, remove the old filter element and install a new one. It is important to clean the housing from dust and debris.

Oil filter and engine oil

Changing engine oil and oil filter is a basic maintenance procedure that you can do yourself if you have the necessary tools. For the job, you will need a jack, a container for used oil, wrenches, and new oil with a filter.

It is important to change the oil when the engine is warm so that the oil is more liquid and drains better. The procedure involves draining the old oil through the drain plug in the oil pan, replacing the oil filter and pouring in new oil through the oil filler neck.

The process can be significantly simplified if you know a good online store of auto parts for foreign cars , where it is easy to choose high-quality consumables for any car. The reliability of the engine for a long period depends significantly on the choice of oil and filters.

Cabin filter

The cabin filter is responsible for cleaning the air entering the cabin through the ventilation system. Its clogging leads to deterioration of the heater, fogging of the glass and the appearance of unpleasant odors. Replacement is usually carried out every 15 thousand kilometers or once a year.

Brake system maintenance

Replacing brake pads

Replacing brake pads requires certain skills and safety precautions. In addition, errors in installing brake systems can be very expensive, many, even fairly qualified car owners, prefer to entrust this work to professional craftsmen. But the initial inspection can and should be done independently. Pad wear can be determined by a characteristic squeak when braking or by visual inspection. Most modern cars have disc brakes with calipers.

The replacement procedure requires jacking up the car, removing the wheel, unscrewing the caliper and removing the old pads. When installing new pads, it is necessary to move the caliper piston apart and install all the elements correctly. After replacement, the pads need to be ground in by smooth braking at low speed.

Electrical system of the car

Battery diagnostics and maintenance

The battery is a key element of the car’s electrical system. Simple diagnostics include a visual inspection of the case for cracks and leaks, checking the electrolyte level and the condition of the terminals.

For more accurate diagnostics, you can use a multimeter to measure the voltage. A fully charged battery should show a voltage of about 12.6-12.8 V. Values ​​below 12.4 V indicate the need for recharging or possible problems with the battery.

Replacing fuses

Blown fuses are a common cause of failure of the car’s electrical systems. Replacing fuses is a simple procedure that does not require special skills. The main thing is to use fuses of exactly the same rating as the original ones.

Fuse boxes are usually located under the hood and in the passenger compartment of the car. On the cover of each box there is a diagram indicating the purpose of each fuse. Before replacing, it is necessary to turn off the ignition and disconnect the battery terminal for safety.

Troubleshooting simple electrical problems

Many problems with car electrical systems are related to poor contacts, corrosion of terminals or damaged wiring. Simple faults can be fixed by yourself after a thorough inspection of the problem area.

The main signs of electrical faults are periodic tripping of fuses, unstable operation of lighting and signaling devices. If damaged wire insulation is detected, it can be restored using insulating tape or heat-shrinkable tubing.

Tire pressure monitoring and puncture repair

Checking tire pressure

Regularly checking the tire pressure is a very simple procedure, but it affects driving safety, fuel consumption and tire wear. Measurements should be taken on cold tires using a pressure gauge.

Recommended pressure values ​​are specified in the vehicle’s operating instructions or on a special plate located on the driver’s door. For most passenger cars, the optimal pressure is 1.9-2.5 bar.

Do-it-yourself puncture repair

Small punctures in the tread part of tubeless tires can be easily repaired independently using special repair kits. Such kits contain bundles of raw rubber, an awl for processing the hole and glue for vulcanization.

The repair procedure looks something like this: after finding the puncture site, you need to remove the foreign object, treat the hole with a special awl and install a tourniquet. After the repair, you need to check the tightness and, if necessary, inflate the tire to normal pressure.

Maintenance of lighting system

Replacing bulbs in headlights and taillights

Replacing burnt-out bulbs in headlights and taillights is a simple procedure that you can do yourself, but access to the headlight bulbs may require removing protective covers or partially disassembling the optics.

When replacing bulbs, it is important not to touch the glass bulb with bare hands, especially halogen bulbs, as greasy marks can cause premature failure. For rear lights, access is usually from the trunk.

Simple headlight repair

Minor damage to headlights, such as cracks in the housing or leaks, can be repaired independently. Special epoxy-based adhesives or polymer sealants are used to seal small cracks.

Engine cooling system

To check the cooling system, check the antifreeze level in the expansion tank and inspect the pipes for leaks. You can replace damaged clamps, add coolant and check the thermostat yourself.

It is important to regularly check the condition of the radiator and cooling fan, especially before the hot season. A clogged radiator can be cleaned with compressed air or special cleaning agents.

More complex repairs related to the engine, transmission or safety systems should be entrusted to qualified specialists. Self-repair should be limited to simple maintenance procedures and replacement of consumables.