Wood carving:
an ancient art that still lives on today Automatic translate

Wood carving is the processing of wood with chisels and knives to create relief, openwork, or sculptural forms, as well as to decorate everyday objects. In the home, it is immediately noticeable: on the façade, in doorways, on furniture, on utensils, and wherever wood is close to the hands and eyes.

Terms and boundaries of craft

Carving relies on a simple pair of tasks: removing excess wood and leaving the desired volume. For the artist, this involves working with plane and light and shadow: an edge creates a highlight, a depression creates a shadow, and together they "assemble" the design without paint.

In common parlance, the word "carving" often refers to anything that features ornamentation on wood. In reality, various activities are closely related: solid wood carving, turning, joinery, inlay, and wood burning. These are often found in the same object, but the demands on the tool and the fiber are different.

There’s another boundary — between carving and carpentry. The carpenter creates volume with timber, axes, and saws, selecting cups and tenons. The carver arrives later or works in parallel, once the form has already been defined and a surface that "speaks" through relief is needed.

Wood as a material

Wood is both soft and stubborn. It cuts along the grain more easily than across it, and almost always "tells" where the split will occur. Therefore, the carver considers not only the grain pattern but also the grain direction, knots, and density differences.

The choice of wood type is usually determined by the task at hand. For shallow relief, wood with a uniform grain pattern is suitable, allowing for predictable cutting action. For exterior parts, resistance to moisture and seasonal deformation is more important, as is the ability to hold fasteners and avoid cracking during drying.

Drying is a subject where mistakes are costly. A raw piece cuts easily, but then the relief "warps," cracks, warps, and sometimes punctures the delicate bridges of the openwork. Therefore, in everyday life, they often worked with materials that had already been lying around: boards from old buildings, dry logs, and parts of broken furniture.

Surface finish is a separate issue. A carved relief can remain "clean" under oil or wax, or it can be painted, or it can be partially tinted. In any case, the finish changes the readability: oil emphasizes the texture, paint evens out the background, patina enhances shadows, and varnish sometimes sharpens the light and shadows but reveals scratches.

Tools and workplace

The minimum set consists of three groups: knives, chisels, and a mallet. A knife creates a line and a fine cut, a chisel removes "meat" and creates a flat surface, and a mallet helps where the hand gets tired or a controlled blow is needed.

Chisels’ geometry is important: straight chisels for flat surfaces, semicircular chisels for recesses, angular chisels for grooves, and chisel chisels for working in recesses. The smaller the radius, the easier it is to create fine relief, but the higher the risk of chipping if the cutting direction is incorrect.

Sharpening is half the craft, but it’s often described more simply than it actually is. A carver pays attention to the angle, the microbevel, and how the edge holds up against impact in hard wood. An oversharpened knife cuts with a "soap," while an undersharpened one tears the fibers and leaves a lint that’s difficult to remove without smudging the shape.

The workstation also influences the result. The workpiece must be secured so that the carver doesn’t have to catch it with every movement. Workshops use stops, vices, clamps, and sometimes a simple sawhorse board with a cutout for the workpiece. The more stable the clamping, the more confident the cut and the smoother the edge.

Basic techniques and types of carving

Flat relief is often used in everyday environments: the background is chosen to be shallow, and the design remains "above" the surface. This type of relief works well on doors, spinning wheels, and chest lids because it doesn’t snag on clothing or break when touched.

There’s also geometric carving, where the design is constructed from simple notches, facets, and "rays." It disciplines the hand: a slight shift in angle and the light falls differently, the pattern loses its rhythm. It values repetition, but allows the handcrafted work the right to a slight, vibrant variation.

Openwork carving, where the background is cut through, creates a different effect: the object begins to interact with light and air. It’s more sensitive to moisture and impact, but it’s suitable for details that need to allow air or light to pass through while still looking elegant.

Sculptural carving stands apart. Proportions, stability of form, and the strength of delicate areas are crucial. In practice, this type of work is often aided by a preliminary clay model or at least a template markup; otherwise, it’s easy to overdo it and end up with an irreparable error.

Encyclopedic descriptions of wood carving emphasize its use as a decorative treatment for everyday objects — for example, in the form of chamfered carving on household items, as well as figurative carving; carved details on milking stools, wooden spoons, and spinning wheels are specifically mentioned. This set of examples is important because it links carving to everyday work, not just to temples and ceremonial furniture. britannica

The house as a "carrier" of carving

When wood is the primary building material, the house itself begs for finishing, because boards and timbers provide a wide surface area. But even in stone cities, wood remains close at hand: in shutters, doors, staircases, furniture, and interior details. Carvings are found in the areas of human contact with the house — near doorways, at the entrance, by the window, by the seat.

Facade carving has practical reasons. The overlay boards cover the joint, seal the end face, and protect the gap from water and wind. The carved pattern is not just a decorative addition, but a form that often aligns with the underlying security: a drip edge, a projection, a cap, a canopy, or a casing.

The second practical layer is orientation and legibility. A person sees a house from the side of the street. The repeating rhythm of the door frames, carved brackets, and friezes helps recognize the building, distinguish one courtyard from another, and find the entrance.

Windows, casings, shutters

A window in a wooden house is always a problematic area: it’s thin, there are gaps, and there are temperature fluctuations. The casing covers the mounting gap and holds the trim around the opening. The threads on the casing are often designed to avoid weakening the component: deep grooves are left in areas where the load is lighter, and thin "feathers" are designed to avoid pulling through the entire element.

Shutters add another function — protection of the glass and a thermal barrier. Their carvings are usually flatter: the sash is buffeted by rain and sun, and too-high relief will deteriorate faster. Therefore, the carver often chooses a design that utilizes facets and grooves rather than thin crossbars.

Cornices, pediments, brackets

The eaves and roof sheathing are areas where the wood is constantly exposed to moisture and variations in elevation. There, the carvings are close to the structure: the bracket holds the overhang, the valance covers the ends, and the windboard protects the edge. Patterns are often based on repeating short elements so that if a partial replacement is necessary, the pattern can be restored without redoing the entire row.

A pediment is a convenient "canvas" for ornamentation: it’s high and visible from afar. But it’s also dangerous for fine carving: wind, freezing rain, birds. Therefore, in outdoor practice, many use overlay carved details made of boards, rather than thin planks, where the lintel can break with a single wrong blow.

Carvings inside the house

Interior carved details work differently than exterior ones. They’re less susceptible to water and UV damage, but they’re more often subject to mechanical contact — from hands, clothing, and furniture. This changes the choice of wood species, the depth of the relief, and the finishing method.

In interiors, carvings are often found on objects that connect rooms: doors, door frames, staircases, and partitions. In such spaces, they are both decorative and informative: they define the boundary, establish the "weight" of the entrance, and help clarify whether this area is the formal or, conversely, the utility area.

Doors and portals

Door panels are ideal for inlays: the frame maintains the geometry, and the inlay provides space for the design. Carvings on inlays can be deeper than on a solid board because the frame absorbs some of the stress from the wood’s seasonal movement.

The carving on a door frame is often connected to the design of the door frame and rebate. It has many overlay elements that are easier to replace during renovations. This is practical: the worn part can be removed and replaced without dismantling the wall.

Stairs and balusters

A staircase is an object where the wood is subject to constant impact and friction. Therefore, carvings are often placed on parts that are handled less frequently: for example, on the posts, the undersides of the balusters, and the stringers. There, the relief lasts a long time and is not "washed off" by hand contact.

For pillars, legibility from a distance is important. The carver chooses large shapes: fluting, geometric bands, and accent overlays. Fine carvings at palm height will quickly become clogged with dirt and turn into a gray mass.

Partitions, grilles, panels

Openwork panels often serve as filters of light and air. In Japanese tradition, carved and inlaid wooden inserts above sliding doors — ranma — historically served as elements that aided ventilation and lighting when dividing rooms. Described as a craft of the Osaka region, ranma is said to have originated in the early 17th century and then spread to merchant homes in the 18th century as a combination of function and decoration. britannica

When working with these types of parts, the craftsman thinks like an engineer. It’s important to leave lintels that can withstand their own weight and the vibrations from the doors. It’s important to remember that a thin lintel will dry out in low humidity and may crack along the grain.

Furniture and utensils

Home furniture and utensils are where carvings are closest to the body. Smoothness and the absence of sharp "teeth" are prized here, as these items are handled every day. The relief is typically lower, the edges softer, and the design is often ergonomically designed.

A chest, a cupboard, a bench, a spinning wheel, a spoon, a ladle — each object has its own pattern. On a chest, the carving often serves as a plane marking: it divides the front into fields and helps conceal the joints between the boards. On a spoon, the excessive relief interferes with cleaning, so the pattern extends to the handle.

Encyclopedic descriptions of carving emphasize the connection of chamfered carving with objects of everyday life and work, citing examples such as wooden spoons, spinning wheels, and milking stools. This is a useful clue for analysis: where an object lives in a wet or dirty environment, the ornamental form is simplified and becomes more resistant to cleaning. britannica

Kitchen and household items

Kitchen utensils are subordinated to hygiene and maintenance. In village practice, carvings on cutting boards and ladles are often minimal: a master’s mark, a simple notch for a grip, a geometric band. Here, the ornament functions as a symbol and a convenience, rather than as a showcase of skill.

Wall-mounted household items offer more freedom. They allow for a more prominent relief because they’re less likely to be touched. However, even here, the artist is mindful of dust: deep "pockets" collect dirt, making them difficult to clean.

Bedroom and "soft" area

In the bedroom, carvings are often found on headboards, legs, mirror frames, and jewelry boxes. There, they are visible up close. Therefore, clean cuts and neat transitions are valued; otherwise, the eye is drawn to jagged edges.

The surface of such pieces is often finished to a smoother finish. This isn’t a whim. In soft light and at close range, everything is visible: a slanted corner, a chisel mark, the nap. Therefore, the craftsman either carefully cuts cleanly or honestly conceals the marks under the finish where appropriate.

Carvings in religious and public buildings

In religious architecture, wood is often associated with carpentry and interior decoration. There, carving is integrated into the structure: iconostasis, icon cases, lecterns, decorative panels. In such structures, technique, resistance to candle smoke, and repairability are all important.

Using the example of Carpathian wooden churches — tserkvas — in Poland and Ukraine, the description of the site notes their construction from horizontally laid logs in the 16th to 19th centuries, as well as the presence of an iconostasis and polychrome interior decoration as part of the historical decor. They also emphasize the tripartite plan and domed tops, as well as traditional carpentry techniques and wooden shingles on the roofs and walls.

For public buildings, carving often becomes a "status symbol," but in a practical sense, it also protects elements that are vulnerable to foot traffic. A carved handrail or post can be made of a denser wood and withstand wear better than a smooth, soft board, because the relief distributes contact across the protrusions.

City and village as different conditions

In the village, wood is traditionally closer: people build from the forest, repair things themselves, and use tools. Therefore, carving there is often "applied," with a clear function: to close a gap, mark a property, or create a comfortable grip.

The city is a different place. Access to materials is different, the customer is often separated from the process, and the carver can become a specialized craftsman. Trade in carved parts is emerging, as are standardized patterns and repeatable profiles. But the handcrafted mark remains, because wood is always slightly different.

The urban environment also raises fire safety concerns. In wooden neighborhoods, this impacts the finishes: sometimes carvings are limited or relegated to the interior. In stone buildings, wood remains indoors — in staircases, furniture, and doors.

Regional schools and receptions

The global map of wood carving is formed by very diverse factors: climate, available wood species, housing types, religion, and trade. Similar motifs can arise independently because geometric shapes are easy for the chisel to carve, and repetition is easy to mark.

At the same time, there are regions where carving has become a prominent part of the urban environment. There, it appears on the facades of residential buildings, on balconies, on doors, and on lattices. This is especially evident in areas where wood was used even when stone was already in use, as wood offered a different type of sculpture and a different pace of construction.

Western India and facade carving

Architectural wood carving is described as a major tradition in the state of Gujarat: it has been called a significant center of carving in India since at least the 15th century. The extensive use of wood in temple pavilions and in the richly carved decoration of residential buildings — on facades, balconies, doors, columns, brackets, and latticed windows — is also noted. britannica

A practical detail is important in this material: the carvings on the façade and balcony act as a boundary between the street and the house. The balcony provides shade and air, while the lattice screens the opening from direct view and sunlight. The carver also creates a work that must maintain the geometry even under the heat and seasonal humidity.

Descriptions of Gujarati carving also mention a stylistic blend of local traditions with Mughal influences, as well as the widespread practice of coating wood with red lacquer. This suggests that carving was paired with finishing, where color and shine enhanced the relief rather than obscured it. britannica

Japan and Ranma as an interior detail

In Japanese architecture, carved ranma panels are placed above sliding partitions and doors. The Osaka tradition suggests that these panels were used for ventilation and lighting, while also serving as a decorative element. The same description notes their origins in the early 17th century and their subsequent popularity in merchant homes in the 18th century .

The technological description also documents the production logic: the use of cedar, paulownia, and cypress, natural drying, surface markings, and three-dimensional carving followed by polishing with insect wax. This is important for researchers of everyday life, as it reveals how the decorative detail is integrated into the craft chain: material, drying, design, cutting, finishing. britannica

Madagascar and carving as a community signature

Encyclopedic information on wood carving cites Madagascar as an example: the Mahafaly people are noted for their developed tradition of carved wooden pillars for funerary structures, as well as the prominence of woodworking among the Zafimaniri; it is specifically noted that the Zafimaniri’s knowledge of woodworking is listed by UNESCO as an intangible cultural heritage. Here, carving is associated with a specific environment — wood as the primary available material — and with a skill that is passed on through community practice. britannica

Such examples are easy to use without romanticizing. In this case, carving is a marker of work skills: the ability to select the appropriate wood, dry it, join it, cut it, and protect the surface. It’s visible in the finished product, but it’s based on the discipline of craftsmanship.

Facades in Europe: Scandinavia and the Slavic Lands

In Norway, wood carving is closely linked to the carpentry tradition and to ornamentation based on plant motifs. The 18th century is considered the golden age of Norwegian carving, and examples include pieces with acanthus motifs, the first of which appeared in an altarpiece created by a Dutch master for Oslo Cathedral in 1699. ethniccraft.blogspot

Acanthus became a part of everyday ornamentation in Norwegian practice: it was carved onto furniture, doors, and church portals. Acanthus carving, it is noted, dates back to the 17th century and is considered "rosemaling in wood," where each detail is constructed from leaves, curls, and interlacings. Carving acanthus requires precise control over volume and depth, as the leaf should appear "alive," with swirling and light. folklife.wisc

Medieval Norwegian stave churches — wood-frame churches — are particularly known for their carved portals with intricate interweaving of lines. When restoring the portal of Urnes Church, craftsmen used medieval tools and methods: they used charcoal and grid lines, forged their own iron chisels, and selected local knot-free pine. The description notes the carving depth of up to ten centimeters and the difficulty of working in narrow recesses, requiring precise tools and constant sharpening. sciencenorway

The Russian tradition of carving window trims — nalikadniki — became a prominent form of façade decoration in the 17th century and became widespread in the 19th century. The trims serve as a frame and protection for the gap around the window, while the carving serves both as decoration and as a "marker" for the house. There are different regional styles: in Siberia and the Nizhny Novgorod region, flat carving, reminiscent of bas-relief, is common, while in the republics of Buryatia, Udmurtia, and Tatarstan, openwork carving, where the wood is sawed through to create a lace-like effect, was more common. themoscowtimes

In the 19th and 20th centuries, window frame makers often worked in teams, borrowing patterns from each other and from everyday objects such as embroidery, tea labels, and soap. Ornamentation includes flowers, curls, stars, and shapes reminiscent of amulets. The connection between carving and symbolism was actively discussed in the 1980s, but researcher I. Khafizov notes that until then, no one had claimed that the patterns had a specific meaning, and that the design depended on the carver’s imagination. In practice, this is the working logic: the craftsman saw samples, adapted them to the tool and board size, and sometimes added a personal touch. themoscowtimes

Alpine style and balconies

In the Alpine regions — Switzerland, Austria, southern Germany, and eastern France — carved designs are often found on balconies and chalet facades. Traditional chalets are characterized by the use of natural wood, carved balusters, and balcony railings, which serve not only as a decorative but also as a structural element. archi

Carved details on the balconies work with the shadows: lintels and vertical bars create rhythm, while small ornamental inserts enliven the surface without overloading it. Where winter snow and high humidity occur, the wood must breathe and dry quickly. Therefore, deep "pockets" where water can stagnate are avoided in the ornamentation.

A description of an early 20th-century Alpine carved panel notes the subject matter: a small mountain chalet, a path, a fence, and trees, carved in low relief on a single piece of dark-stained wood. Such panels were made in winter, sold at mountain inns, or kept as souvenirs. This demonstrates the economic side of the craft: carving supplemented income during the season when the main work was suspended.

Ornament as a marking system

The design is based on repetition and symmetry. Repetition simplifies marking and makes the design predictable, even when the artist cuts without a ruler. Symmetry provides support for the eye: if one side is clear, the other is formed like a mirror. An error becomes noticeable precisely when symmetry or rhythm is violated, because the human eye quickly detects any disruption.

Geometric patterns are especially convenient in this regard. They are easy to mark out using a grid, compass, square, or ruler. Triangles, diamonds, rosettes, stars, circles, hexagons, and stripes are all shapes that can be carved without a sketch if the artist has the pattern memorized. This approach allows for quick carving and avoids the need for complex pattern transfer.

In flat relief and geometric carving, modules are often used — small fragments that form a long frieze or fill a plane. This is convenient for repairs: if one board is damaged, it can be replaced by repeating the module, and the joint will be invisible in the overall rhythm.

The pattern is also linked to the grain direction. The artisan strives to create the design in a way that minimizes cuts across the grain, otherwise the edge will be ragged or require additional finishing. In some traditions, the design is constructed from stripes along the grain, while the cross-grain ties remain wide and strong.

Guilds, apprenticeship, skill transfer

In medieval Europe, carving and carpentry were often organized into guilds. Guilds united masters, journeymen, and apprentices, regulated access to the work, protected secrets, and monitored quality. For a woodcarver, the path began with an apprenticeship: a boy would be assigned to a master for several years, where he initially performed simple tasks — carrying tools, clearing shavings, and sharpening knives. en.wikipedia

Gradually, the apprentice began cutting simple pieces under supervision. They were taught not only technique but also an understanding of the material: how to select a board, where the knots were, where the grain went, how to dry the workpiece. The most subtle techniques were revealed only when the master was confident the apprentice would not reveal his "signature" approach. en.wikipedia

After the apprenticeship came the journeyman stage. A journeyman could work for a fee, but was not yet considered a full-fledged master. In some guilds, the journeyman would go on a journey — a Wanderjahre — working for different masters, gaining experience and learning about different techniques and tools. This period helped the carver expand their repertoire and learn to adapt their technique to local woods and orders. en.wikipedia

The end result was the creation of a "masterpiece" — a work that demonstrated the ability to work independently and at a high level. The masterpiece was assessed by all the guild’s masters, and only after approval did the apprentice receive master status. In some cases, a contribution in money and goods was required; for the sons of masters, these requirements were often relaxed. en.wikipedia

In Britain, after the dissolution of the monasteries and during the Puritan period, the guild tradition of carpentry weakened, work became scarcer, and guilds lost their former role. In continental Europe, itinerant apprentices continued to travel across countries, including Great Britain, and work on large construction projects. carvingswithstories.blogspot

Economy of crafts

Wood carving has always been about saving time and materials. The more complex the design, the more hours it takes to complete. Therefore, the carver calculated his efforts: where to simplify the form without losing the effect, where a groove would suffice instead of a full relief, where repetition would save on markings.

Specialization began to emerge in city workshops. One craftsman cut furniture parts, another façade elements, and a third made spoons and household utensils. This ensured speed and consistent quality: someone who cut the same door frames for months produced them faster and more accurately than someone who took on everything.

The trade in carved parts also simplified construction. One could buy a ready-made carved bracket, architraves, panels, or capitals and assemble an interior or façade without commissioning a carver. This made carving more accessible, but often led to the duplication of the same motifs.

Carving as a supplementary income was common in villages where fieldwork was suspended during the winter. The craftsman carved pieces for local houses, churches, and fairs. This was seasonal work, where speed was essential, and the design was often drawn from memory or a nearby sample.

In some regions, carved pieces were sold at fairs or through resellers. The buyer would choose from ready-made samples, and the craftsman would repeat the order. This is how standard forms emerged: a popular pattern would be copied by dozens of carvers, becoming the "language" of the area.

Restoration and maintenance

Carvings last as long as the wood. Water, UV rays, fungus, insects, and mechanical impacts all destroy the material. Therefore, restoration and maintenance are a constant part of the life of carved pieces, especially exterior ones.

When restoring, it’s important to identify exactly what’s damaged. If an end piece is rotting, a new section can be spliced. If a lintel is cracked, it can be glued, reinforced, or sometimes the entire module replaced. If the paint layer has swollen and peeled, the old coating must be removed, the wood dried, treated with protective compounds, and a new coat applied.

The restorer tries to preserve as much of the original as possible. But in practice, this isn’t always possible. If a piece has completely rotted, a copy must be cut out. This raises the question: should one replicate every imperfection of the original or create a "pure" version of what the original master intended? Different schools of restoration offer different answers.

Caring for carvings in a home requires simple rules: keep the wood dry, avoid placing furniture too close to the wall, check for insect damage, and periodically reapply oil or wax. For exterior woodwork, protecting the edges and areas where water can accumulate is more important, as these are where wood rots first.

The tools used for restoration are the same as those used for carving, but they are supplemented with bonding, strengthening, and tinting compounds. Restorers often work with material where the fiber is damaged or softened, so the cut must be very careful, otherwise it can further damage what remains.

Carving and modern life

Wood carving hasn’t disappeared from everyday life, but its role has changed. It’s rare in mass-produced housing: standard finishing is cheaper and faster. However, in private homes, renovations, and custom interiors, carving is reappearing as a sign of "handcraftedness" and a connection to craft.

Modern clients often desire an "ethnic" or "historical" style. The carver must either faithfully reproduce the original or adapt the old motif to a new context: a different scale, a different wood, a different space. This requires both a knowledge of tradition and the ability to break from it.

Mechanization also changes the process. A router can cut a repeating profile faster than a hand. A laser can cut a thin, openwork sheet in an hour instead of several days. But the machine has a different "handwriting": the line is too straight, the transitions are mechanical. Therefore, the manual process remains valuable, even if it is slower and more expensive.

In educational programs, carving is often offered as a complementary course within carpentry or artistic crafts. This preserves tradition, but rarely provides a fully-fledged "guild" career: a long apprenticeship, a variety of tasks, and connections with other craftsmen. Instead, students acquire basic skills and then learn independently or with private craftsmen.

There are also movements attempting to revive older forms of education. Masterclasses, summer schools, and online courses provide access to techniques, but they don’t replace years of practice under the guidance of an experienced carver. At the same time, they open the craft to those who previously had no access to it.

Museums, collections, documentation

Wood carving is fragile compared to stone or metal. Many examples are lost simply because a house burned down, a piece was thrown away during renovations, or the wood rotted. Therefore, documentation and museum preservation are becoming a way to preserve at least information about what the craft looked like in different eras.

There are wooden architecture museums that house entire houses or their fragments. There, you can see the carving in context: how it sits on the façade, how it fits into the structure, how it varies from region to region. This is more important than a single detail in a display case, because carving always interacts with its surroundings.

There are also virtual archives. For example, the "Virtual Museum of Carved Window Trims" project collects photographs of windows from various cities in Russia, Belarus, Kazakhstan, Ukraine, Poland, and other countries. The goal is to showcase the diversity of styles and capture details before they are lost during demolition or reconstruction. nalichniki

Photographic documentation is also useful for practitioners. A carver can study a sample, understand how the pattern was constructed, what tools were used, and where the master made simplifications. This replaces some of the oral training that previously took place through guilds or families.

Scientific descriptions of carvings often focus on style, but for the artisan, technological details are more important: board thickness, cutting depth, joint type, and fastening method. If such data is included in a museum description, it becomes available to future generations and helps restore lost techniques.

Wood species and their properties in carving

The choice of wood depends on the location, the task, and the budget. Linden is soft, cuts easily, and produces a clean cut, but it doesn’t hold moisture well and darkens quickly outdoors. Oak is hard, durable, and rot-resistant, but requires sharp tools and physical effort. Birch is dense, uniform, and suitable for fine relief work, but it’s sensitive to drying — it warps and cracks.

Softwoods — pine, spruce, and cedar — are readily available and inexpensive. They’re easy to cut, but the resin can sometimes be a nuisance: it sticks to the knife and clogs the pores. However, resinous wood is resistant to rot, so it was often used for exterior parts. Larch retains water even better, but is harder than pine and requires more powerful tools.

Exotic woods — boxwood, rosewood, and ebony — are used for fine carvings and objects where density and durability are important. However, they are expensive and rare, so they are rarely found in everyday use.

For a carver, not only the type of wood but also the section of the trunk is important. Heartwood is denser than sapwood, but often has cracks. Sapwood is softer but rots more quickly. The butt section is denser than the top. All of this affects how the piece will perform after installation.

The time the tree was felled is also important. Winter wood is denser than summer wood and is less prone to cracking during drying. Traditional practices took this into account, but such control is rare in modern timber supply chains.

The influence of climate on carving

Climate dictates the material, technique, and form of the ornament. In humid climates, wood swells and contracts more, so the carver leaves gaps, avoids thin bridges in the openwork, and uses durable woods. In dry climates, wood cracks from drying out, so oiling and protecting the edges are essential.

In cold climates, carvings are often located inside the house because the wood becomes brittle in the cold and absorbs moisture when it thaws. However, with proper protection and the right wood, external carvings can last a long time: examples from Scandinavia and Siberia demonstrate this.

In hot climates, the sun quickly destroys unprotected wood: it fades, cracks, and dries out. Therefore, carvings are hidden under shelters, coated with a thick layer of paint or varnish, and wood species with high resin and tannin content are chosen.

The maritime climate is dangerous because of the salt: it eats into the wood and accelerates the corrosion of fasteners. For coastal areas, threads are made removable so they can be removed, washed, treated, and reinstalled.

Furniture carving: design and decoration

Furniture carving is a balance between decoration and construction. A carved table leg must support the weight of a table, and a carved chair back must not break under pressure. Therefore, the carver considers not only the design but also where there is sufficient material left over to ensure strength.

A paneled design is a classic way to incorporate carving into furniture. The frame holds the geometry, while the panel provides a canvas for the ornamentation. Deeper carvings make the panel lighter but weaker. Therefore, the depth of the relief is calculated based on the board thickness and the load.

Applied carving is another technique. The ornament is cut out separately and then glued or nailed to a smooth surface. This is convenient for repairs: a damaged overlay can be removed and replaced. However, an overlay does not hold up as well as a relief carved from a solid piece, so it is used in areas where there are no strong impacts.

The carvings on handles, armrests, and tabletop edges should be smooth to the touch. Finishing is crucial: sanding, polishing, and sometimes wax or oil, which create a silky surface. Sharp edges are smoothed to prevent scratching.

The connection of carving with other crafts

Carving rarely exists alone. It’s often found alongside painting: first, the relief is carved, then covered with paint, gilding, or varnish. This is a standard technique in iconostases and church furniture: gilded carving on a dark or colored background creates a powerful visual effect.

Carving overlaps with turning. Balusters, legs, and posts are often turned first, then carved. This requires the craftsman to understand both techniques or to work in tandem.

Carving is combined with inlay. In 18th- and 19th-century furniture, carved reliefs were complemented by inlays of other woods, bone, mother-of-pearl, and metal. This complicates the work but creates a richness of texture.

Carvings work alongside joinery joints. Mortise and tenon joints, dovetail joints, and dowels are all components that hold a structure together. The carver must know where the joint runs to avoid weakening it with a deep cut.

Copying, variation, authorship

In traditional carving, the concept of authorship is vague. The craftsman would take a well-known motif and adapt it to his own hand and the commission. No one demanded "originality" in the modern sense. Quality of execution, not novelty of form, was valued.

Copying patterns was the norm. An apprentice learned by imitating the master’s work. A customer would bring a picture or show a neighbor’s door frame and ask for something similar. The master would produce something similar, but not identical, because the material and the hand are always slightly different.

Variations arose naturally. The master would simplify a complex pattern to meet a deadline. Or complicate a simple one to demonstrate his skill. Or adapt it to a different board size. Thus, local variations of a common motif were born.

Authorship became visible only among outstanding carvers, whose works stood out for their technique or composition. They were invited to undertake large commissions, and their names were sometimes recorded in documents. But most carvers remained anonymous, and their work "disappeared" into the general flow of the craft.

Today, the situation is changing. Carvers often work as artists: signing their works, exhibiting them, and protecting their copyrights. This brings recognition and the opportunity to sell at a higher price, but it moves away from the old logic, where carving was part of a collective language rather than a personal statement.